12296
80
Zoom out
Zoom in
Previous page
1/88
Next page
MAINTENANCE
18
75
Troubleshooting
If your transceiver seems to be malfunctioning, please check
the following points before sending it to a service center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes on. Power connector has a poor contact.
Polarity of the power connection is reversed.
Blown fuse.
Check the connector pins.
Reconnect the power cable observing the proper
polarity. Replace the fuse, if damaged.
Check the cause, then replace the fuse.
pgs.
13, 77
p. 77
No sound comes from the
speaker.
Volume level is too low.
The squelch level is set too tight.
An optional selective call or squelch function is
activated such as tone squelch, pocket beep,
pager or code squelch.
Rotate [VOL] clockwise.
Set the squelch level to the threshold.
Turn the appropriate function OFF.
p. 20
p. 20
pgs.
53, 54,
59, 62
Sub band signals are not au-
dible.
The sub band mute function is activated. Turn the function OFF. p. 23
Sensitivity is low and only
strong signals are audible.
Antenna feedline or the antenna connector sol-
der has a poor contact or is short circuited.
Check, and if necessary, replace the feedline or
solder the antenna connector again.
p. 14
No contact possible with an-
other station.
The transceiver is set to semi-duplex.
The other station is using code or tone squelch.
Set to simplex.
Turn ON the optional code squelch (UT-49) or
optional tone squelch (UT-104 ).
p. 28
pgs.
62, 54
Repeater cannot be ac-
cessed.
Wrong offset frequency is programmed.
Wrong subaudible tone frequency is pro-
grammed.
Correct the offset frequency.
Correct the subaudible tone frequency.
p. 30
p. 29
Frequency cannot be set.
The frequency lock function is activated.
Priority watch is paused on the watching fre-
quency.
Turn the function OFF.
Push [(M/CALL)PRIO] to resume the watch.
p. 16
p. 48
IC-2710H.qxd 02.2.8 16:55 Page 75 (1,1)
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info