12296
79
Zoom out
Zoom in
Previous page
1/88
Next page
17
OTHER FUNCTIONS
74
Microphone [F-1]/[F-2] keys
Switches on the transceivers front panel can be assigned to
the microphones [F-1] and [F-2] keys.
Turn power OFF.
While pushing the desired switch on the transceiver and
[F-1] or [F-2] on the microphone, turn power ON.
The switches function is programmed into the key ([F-1] or [F-2]).
Default setting
The following functions are assigned to the [F-1]/[F-2] keys
when rst applying power or after CPU resetting:
[F-1]: VHF band tuning dial switch
[F-2]: UHF band tuning dial switch
Display dimmer setting
Adjust the intensity intensity to suit lighting conditions and
personal preference.
Push and hold [VOL(SET)D] (right side) until d-1”–“d4 ap-
pears as shown below.
Rotate the tuning dial (right side) to set the desired inten-
sity.
Intensity can be set from d1 (dark) to d4 (bright).
Push [VOL(SET)
D] to return to normal operation.
Demonstration display
A demonstration function is available at power ON. This func-
tion gives you a quick visual introduction to the function dis-
play indicators.
While pushing either tuning dial, push [POWER] to turn
power ON.
The transceiver cycles through a visual tour of the function dis-
play indicators.
Push any switch to exit demonstration mode and enter the
normal operating condition temporarily.
NOTE: The transceiver automatically returns to demon-
stration mode after 2 min. in which no operations are per-
formed. To deactivate the demonstration display
permanently, perform step again.
9
IC-2710H.qxd 02.2.8 16:55 Page 74 (1,1)
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info