802196
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Maintenance & Care
IMPORTANT - Routine and accurate
maintenance is essential for maintaining
original machine safety and performance
levels.
Always stop the engine and unplug the spark
plug before doing any repairs or maintenance.
Only use original spare parts: The
use of non-original and/or incorrectly fitted
parts will jeopardize the safety of the machine,
may cause accidents or personal injuries for
which the Manufacturer is under no
circumstance liable or responsible.
1. Wear strong protective gloves before
cleaning, maintaining or making adjustments
to the scarifier.
2. You must remove grass and mud from the
machine to prevent it from drying. This will
cause problems the next time the scarifier is
used. For more information on cleaning, go to
page 30.
3. Paint on internal chassis parts may start to
flake over time due to abrasive action of cut
grass. If this happens, you should touch-up
with rust-proof paint to prevent rusting that
could corrode the metal. You can also use a
light oil or silicone spray to prevent rust.
4. If you need to access the lower part of the
scarifier, you must tilt the scarifier with the air
filter facing up, following the relevant
instructions, making sure that the machine is
stable before performing any interventions.
5. Make sure not to drip petrol onto the plastic
parts to prevent damaging them and remove
all traces of spilled petrol immediately. The
warranty will not cover damage to plastic
parts caused by petrol.
6. It is highly recommended to change the
engine oil every 100 hours or 12 months. This
will ensure the machine will function properly
over time. The oil can be discharged at a
specialised servicing centre, or by using a
syringe to suction the oil out through the filler
spout, bearing in mind you may need to repeat
the operation several times in order to
completely empty the tank. Remember to
top-up with oil before using the machine
again.
7. Lubricate the wheel bearings with a suitable
lubricant.
8. It is necessary as part of routine
maintenance to adjust the OPC (Operator
Presence Control) cable tension to ensure the
lawnmower will start correctly.
If there is more than 10mm movement in the
OPC lever before the cable begins to move,
then the OPC cable will require adjustment.
CAUTION - DO NOT use a hose pipe or
pressure washer to clean the engine. Water
can damage the engine or contaminate the
fuel system.
Routine Maintenance
!
!
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HYSC210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HYSC210 in the language / languages: English as an attachment in your email.

The manual is 3.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info