802196
26
Zoom out
Zoom in
Previous page
1/40
Next page
26
Maintenance & Care
The Spark Plug
You MUST allow the engine to cool down
before carrying out any maintenance.
Remove the spark plug HT lead cap. Undo the
spark plug from the engine and remove.
STEP 1
Always replace with the same model spark
plug as fitted.
STEP 2
STEP 3
To clean the spark plug, gently clean the elec-
trode with a soft wire brush.
STEP 5
The spark plug gap should be 0.70mm to
0.80mm. Check the gap by using a feeler
gauge. Adjust as necessary by carefully
bending the side electrode to achieve the
correct gap.
STEP 6
00.28” to 0.031”
0.70mm to 0.80mm
Refit the cleaned and adjusted speak plug
by hand to avoid cross threading then lightly
tighten with a plug spanner.
STEP 7
Re-attach the spark plug HT lead cap.
STEP 8
Visually inspect the spark plug for signs of
damage, wear or carbon build up. If damaged
or worn, replace immediately.
STEP 4
Spark Plug
Spark Plug
Cap
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HYSC210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HYSC210 in the language / languages: English as an attachment in your email.

The manual is 3.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info