802196
23
Zoom out
Zoom in
Previous page
1/40
Next page
23
Maintenance & Care
Safety
1. WARNING - Before cleaning or doing
maintenance work, you need to disconnect
the spark plug cable and read the relevant
instructions. You need to wear proper clothing
and protective gloves whenever your hands
are at risk.
2. WARNING - If there are worn or
damaged parts, never use the machine. Faulty
or worn-out parts must be replaced and not
repaired. You must only use original spare
parts. The use of non-original and/or
incorrectly fitted parts will jeopardize the
safety of the machine. This may also cause
accidents or personal injuries for which the
manufacturer is under no circumstance liable
or responsible.
3. Any maintenance operations or adjustments
not explained in this manual must be carried
out by your Dealer or a specialised Service
Centre with the necessary knowledge and
equipment to ensure that the work is done
correctly maintaining the scarifier’s original
safety level. Any operations performed in
unauthorised centres or by unqualified
persons will invalidate the Warranty and all
obligations and responsibilities of the
Manufacturer.
4. Disconnect the spark plug cable and
check for damage after each use.
5. To be sure the machine is in safe working
condition, keep all nuts, screws and bolts
tight. Routine maintenance is essential for
safety and for maintaining a high performance
level.
6. On a regular basis, check that the blades
screws are properly tightened.
7. When handling, disassembling and
re-assembling the blade, make sure to wear
work gloves.
8. Keep the blade well balanced during
sharpening. All work on the blade
(disassembly, sharpening, balancing,
re-assembly and/or replacing) should be
carried out at a specialised centre as they are
demanding jobs that require special skills and
special tools.
9. Be very careful during adjustment of the
machine to prevent entrapment of the fingers
between moving parts of the blade and fixed
parts of the machine.
10. Do not touch the blade until the spark plug
has been disconnected and the blade is
completely stationery. When servicing the
blade, even though the spark plug cable is
disconnected, the blade can still move.
11. Check the grass collector frequently.
Replace if damaged.
12. If any warning message stickers or
instruction is damaged, replace them.
13. Store the machine in a safe place, out of the
reach of children.
14. Do not store the machine with fuel in the
tank in an area where the fuel vapours could
reach an open flame, a strong heat source or a
spark.
15. Engine must be cooled down before storing.
16. To reduce fire hazards, keep the engine,
silencer, battery compartment and petrol
storage area free of grass, leaves, or
excessive grease. You must always empty the
grass collector and do not leave containers full
of cut grass inside storage areas.
17. To reduce fire hazards, check there is no oil
and/or fuel leaks on a regular basis.
18. If you need to empty the fuel tank, this
should be done outdoors once the engine has
cooled down.
!
!
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HYSC210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HYSC210 in the language / languages: English as an attachment in your email.

The manual is 3.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info