Manual Hwam Classic 10-50 (page 26 of 40) (English, German, Danish, Swedish)

744553

Zoom out

Zoom in

1/40

2. Restructuring of brickwork around stove insert (Drawing D)

During the reconstruction, the outer casing should be carefully levelled off at a suitable

height. Remember a conduit pipe for the electricity supply (12 volt) to the blowers. As the

reconstruction progresses, there should be a gap of min. 3 mm between the brickwork and

the outer casing. Any brickwork stretching across the outer casing must be self-supporting.

Fire tubes and any convection ducts to other rooms should be ﬁtted to the outer casing

during the reconstruction.

The outer casing is not load-bearing. Therefore, ﬁre tubes exceeding 2 m in length and,

possibly, the chimney, must be secured (using hangers) thus avoiding putting any load on

the outer casing.

When the reconstruction has been completed, mount the stove insert as described in A

and B.

Fitting the loose parts

(Drawing E)

Before you start using the stove insert, you must ensure that all loose parts are ﬁtted correctly.

(Drawing E1)

1. Smoke shelf of steel suspended under top cover.

2. Smoke shelf of Vermiculite. Rests on back edge, and front edge rests on brackets ﬁtted to

the sides. The smoke shelf is ﬁtted with a rounded steel front edge.

3. Cover plate in HWAM Classic 10/60. This is placed on top of the grate to prevent embers

from falling into the ash pan.

4. The transformer for the blowers should always be connected to an electrical socket.

The blowers must be switched on when the stove insert is in use. They are switched on and

off manually.

5. Ash pan available in HWAM Classic 10/60 only.

Handles (Drawing E2)

6. The damper in the door regulates the rinsing air that keeps the glass free from soot. This is

also the secondary combustion air which is led into the combustion chamber.

7. The primary air is regulated by a sensor and the automatic damper on the right side of the

liner.

8. The primary air is led to the combustion chamber through a channel beneath the bottom and

is fed to the layer of embers by the guide plate (8) at the front of the combustion chamber.

9. The automatic sensor can be adjusted inside the stove.

Ash pan in HWAM Classi 10/60 (Drawing E3)

To open the ash pan, press the handle to raise the back edge. The ash pan can now be pulled

out.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hwam Classic 10-50 in the language / languages: English, German, Danish, Swedish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam Classic 10-50

Hwam Classic 10-50 User Manual - Dutch, French, Italian, Spanish - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hwam Classic 10-50 Manual

Product: