613740
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
If the stove has not been used for a longer period, it is important to check that the chimney pipe is
not blocked. It is possible to connect several devices to the same chimney. However, it is important
to first check the applicable rules.
Even a good chimney can function badly if it is not used correctly. Similarly, a bad chimney may func
-
tion well if used correctly.
Chimney sweeping
To prevent the risk of chimney fires, the chimney must be cleaned every year. The flue duct and the
smoke chamber above the baffle plate must be cleaned together with the chimney. If the chimney is
too tall to be cleaned from above, it must be equipped with a soot door.
In case of a chimney fire and overheating, the HWAM Autopilot IHS
TM
will enter a security mode and
automatically adjust all dampers, effectively quenching the fire. Do not open the stove door, since that
might cause the fire to rekindle. Contact the fire brigade. After a fire, the stove should be checked
by a chimney sweep before use.
tHE REMotE contRol
The remote control is the user interface of the HWAM Autopilot IHS
TM
. The remote control measures
the actual room temperature. It must hence be placed in a location in the room, where it is not affected
by unnaturally high temperatures, such as the wood-burning stove’s radiation heat or direct sunlight.
On the remote control you enter the desired heat level, as you would on a radiator thermostat. Via
radio waves the remote control sends information to the stove’s Air box (control system) about the
present room temperature as well as the desired heat level.
Below you will find the functions of the remote control. As a point of departure, the normal display
image of the remote control will show four points:
1) The room temperature
2) The battery level of the remote control
3) The adjustment of the thermostat (the heat level selected)
4) The status line (shows the combustion phases)
Button:
Long pressure – can only be carried out when there is no light in the display =
advanced menu
Short pressure - in the start phase or the combustion phase = adjustment of
the thermostat (desired heat level)
Short pressure - in standby or the burning out phase = start the wood-burning
stove, i.e. prepare the stove for lighting up.
Symbol Description
IHS-logo
Visible when the remote control is switched on, for instance when the batteries
are changed.
20° C
IHS
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam 3220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 3220 in the language / languages: English, Italian as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 3220

Hwam 3220 User Manual - German, Dutch, French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info