627050
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
Control of the feed depth
The cutting depth is set by moving the scale nut on the scale rod. In batch production, the cutting depth is
controlled by loosening screw (3), turning the hand wheel (2) and moving the scale nut to the desired depth.
Coolant system
Turn coolant pump switch (16) to the on position, then turn the coolant valve (7) to control the coolant supply.
Work table bracket
By loosening lever (21) and turning lift handle (1) the work table bracket can be elevated to its desired height. It
can also swing around the column.
By loosening lever (20) the work table can be rotated on the center at ± 180°.
Do not forget to clamp the levers (20 and 21) tightly after adjustment.
If you loosen the 4 nuts M14 on the bracket and remove the roller pin, the work table can be tilted ± 45°. To reset
the bracket, readjust the table with accuracy conform G5 and push the roller pin back in.
8. lubricaTion
Figure F – Lubrication
8.1. lubricaTion meThods
Grease lubricating
The gears in the gear box are lubricated by no. 3 lithium grease. For new machines, after 6 months of running, the
lubricant must be cleaned and changed. Subsequently, grease must be replaced once per year. The gears in the
driving system are lubricated by no. 3 grease, the worm is lubricated in the oil tank.
The lubricant in the oil tank is machine oil. The oil should be changed every 6 months. On the right side of the
machine, there is a filling hole and an oil gauge. The oil outlet is located at the bottom of the oil tank. The level of
the oil is indicated by the oil gauge.
Hand oiling
a. Hand lubricating places (see figure F)
b. Hand lubricating method
Lubrication Description Method Lubricant Cycle
1 Main driving shaft I bearing Oil gun Lithium grease no. 3 Every 3 months
2 Main driving shaft II bearing Oil gun Lithium grease no. 3 Every 3 months
3 Main driving shaft III bearing Oil gun Lithium grease no. 3 Every 3 months
4 Bracket lift system Oil gun Machine oil nr. 40 Every shift
5 Bracket lift worm bearing Oil gun Machine oil nr. 40 Every shift
6 Column guideway surface
Oil gun
pouring
Machine oil nr. 40 Every shift
7 Column guideway surface
Oil gun
pouring
Machine oil nr. 40 Every shift
8 Feed worm wheel Oil gun Machine oil nr. 40 Every 6 months
9 Spindle sleeve surface
Oil gun
pouring
Machine oil nr. 40 Every shift
10 Gear shaft bearings Oil gun Machine oil nr. 40 Every shift
11 Feed system Oil gun Machine oil nr. 40 Every shift
12
Speed declutch
Shift shaft
Oil gun Machine oil nr. 40 Every shift
13
Speed declutch
Shift shaft
Oil gun Machine oil nr. 40 Every shift
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 30 TI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 30 TI in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 30 TI

Huvema HU 30 TI User Manual - German - 28 pages

Huvema HU 30 TI User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info