627050
13
Zoom out
Zoom in
Previous page
1/28
Next page
13
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
4. Technical specificaTions
No. Description Measure Unit
1. Maximal drilling diameter 30 mm
2. Distance between axis of spindle – column surface 320 mm
3. Max. distance between spindle nose and work table surface 620 mm
4. Max. distance between spindle nose and base surface 1180 mm
5. Max. spindle travel 135 mm
6. Max. travel of work table and bracket 550 mm
7. Horizontal swing of table on bracket ± 45 degree
8. Taper of spindle bore 3 Morse
9. Number of spindle speeds 12 steps
10. Range of spindle speeds 72-2600 rpm
11. Number of spindle feeds 3 steps
12. Spindle feed range 0.1, 0.2, 0.3 mm/rev.
13. Column diameter 120 mm
14. Table working area 500 x 450 mm
15. Base working area 370 x 360 mm
16. Work table and base T-slots 2 x14 mm
17. 3-phase, 2-speed AC motor
Power 1 / 1.5 kW
Voltage 380 (220, 400, 420) V
Speed 960 / 1450 rpm
18. 3-phase electrical pump
Power 0.085 kW
Voltage 380 (220, 400, 420) V
Capacity 6 l/min
19. Electromagnetic clutch
Power 0.024 kW
Voltage 24 V
20. Machine dimensions (LxWxH) 870 x 510 x 2120 mm
21. Machine weight nett 440 kg
22. Noise level information 74/76 dB(A)
Subject to change.
5. TransporTaTion and insTallaTion
5.1. TransporT of The machine
Handle with care when transporting the machine, Pay close attention to the shipping marks. Don’t lay down
the machine on the wrong side. Avoid impact.
The machine is fully assembled and packed before shipping to the customer. Please check carefully when
opening the package and make sure no parts are missing.
When lifting the machine by crane, the center of gravity should be closely watched. For the correct method,
seef figure C. To avoid damaging the machine surface, preferably put soft materials between the rope and
the machine surface.
5.2. foundaTion and insTallaTion
Take the work table as radius, go 360° around the column to determine the max. area of the foundation. The
diameter of the foundation is 1430 mm (see figure B). Customers can decide the foundation area according
to their own needs.
The depth of the foundation is chosen so that it rests on a dense soil. The depth shown in figure D is just for
reference.
Pour concrete around the foundation bolts after setting these in the accurate positions. After solidification of
the concrete, place the machine on the foundation and tighten the foundation bolts. Check adjustment with
a spirit level in longitudinal and transversal direction.
Figure C – Machine transportation
Figure D – Foundation and installation
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 30 TI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 30 TI in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 30 TI

Huvema HU 30 TI User Manual - German - 28 pages

Huvema HU 30 TI User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info