627060
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
16
problem Possible cause Possible solution
5. Encoder
sometimes counts,
sometimes not
a. Encoder carrier
removed from friction ball
a. Repair
b. Encoder parts stuck in
reader head
b. Repair
c. Dirt in the encoder c. Repair
d. Steel wire in reading
head not exible enough
d. Repair
11. deactivation
If the digital readout is to be out of use for a long period, it is advisable to proceed as follows:
Disconnect the digital readout from the power source.1.
Clean the digital readout.2.
cover the digital readout if necessary.3.
12. Dismantling
(due to deterioration and / or obsolescence)
General rules
If the machine is to be permanently demolished and / or scrapped, divide the material to be disposed
of according to type and composition, as follows:
Cast iron or ferrous materials, composed of metal alone, are secondary raw materials, so they may 1.
be taken to an iron foundry for re-smelting after having removed the contents (classied in point
3).
Electrical components including the cable and electronic material (magnetic cards, etc) fall within 2.
the category of material classied as being assimilated to urban waste according to the laws of
your local state, or federal government, so they may be set aside for collection by the public waste
disposal service.
Old minerals and synthetic an / or mixed oils, emulsied oils and greases are considered hazardous 3.
or special refuse, so they must be collected, transported and disposed of at a special waste disposal
service.
Attention
The standards and legislation concerning refuse are subject to change. The
user must keep informed of the regulations at the time of disposal as they
may differ from those described above.
13. Spare parts
Regulations when ordering spare parts
When ordering spare parts, always supply us with following data:
machine type
serial number
year it was build
name, number and code of the part (refer to the spare parts drawings and lists)
the quantity needed
In case the spare part can not be well identied on the drawing / in the list, to avoid delivery of the
wrong part, it is recommended to
a) send us the original part
b) send a digital picture to info@sw-tools.nl
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 1010 B-4 SINO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 1010 B-4 SINO in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 1010 B-4 SINO

Huvema HU 1010 B-4 SINO User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info