734150

Husqvarna WDC 225 Manual

12
Zoom out
Zoom in
Previous page
1/368
Next page
Dangerous materials
WARNING: Do not clean dangerous
materials. This can cause injuries.
• Do not clean the following materials:
• dangerous dust
• hot materials, for example burning cigarettes and
hot ash.
• flammable, explosive, aggressive liquids, for
example gasoline, solvents, acids and alkalis.
• flammable, explosive dust, for example
magnesium or aluminum dust.
Spare parts and accessories
CAUTION: Only use spare parts and
accessories for the safety of the product.
• Use only spare parts and accessories from
Husqvarna.
• Use only the brushes supplied with the product or
referred to in the operator's manual.
Explosive or flammable atmosphere
CAUTION: Do not use the product in
explosive or flammable atmospheres. Do not
use the product near liquids, gas or fume
that can cause flammable atmospheres.
Blower function
WARNING: Dust can cause health
problems.The product has a blower function.
Do not blow the outgoing air randomly in
closed areas. Use the blower function only
with a clean hose.
Safety instructions for maintenance
WARNING: Read all warning instructions
that follow before you do maintenance on
the product.
To empty the dirt container
CAUTION: Cleaned material can be
dangerous to the environment. Discard the
dirt referring to legal regulations.
Assembly
WARNING: Read and understand the safety
chapter before you assemble the product.
To do before installation
1. Unlock the clasps and lift off the motor unit. (Fig. 8)
2. Remove the accessories from the dirt container.
(Fig. 9)
3. Make sure that all parts are included. See the
product overview. Necessary tools: Screwdriver.
To install the filter bag
1. Put the main switch to the "0" position.
2. Disconnect the product. (Fig. 10)
3. Unlock the clasps and lift off the motor unit. (Fig. 8)
4. Put the filter bag in the dirt container.
5. Attach the cardboard part of the filter bag on the
vacuum inlet. Make sure that the rubber membrane
is passing past the heightening of the vacuum inlet.
(Fig. 11)
6. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To attach the accessories
1. Put the accessories in their position for easy access.
(Fig. 13)
2. Attach the tool box at the rear of the product. (Fig.
14)
3. Attach the holder for the the cable and the hose at
the rear of the product. (Fig. 15)
To install the hose
1. Put the hose in the vacuum inlet on the front of the
product. (Fig. 16)
2. Connect the appliance into the mains.
3. Put the main switch to the "I" position. (Fig. 17)
4. Adjust the suction power on the handle or by the
main switch*. *Only on some models. (Fig. 18)
12 562 - 004 - 20.03.2019
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna WDC 225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna WDC 225 in the language / languages: All languages as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info