518172
38
Zoom out
Zoom in
Previous page
1/48
Next page
38 – Basic Sewing Te nique
SEWING ON BUTTONS
Sew buttons, snaps, hooks and eyes quickly with your
sewing machine.
1. Snap off the presser foot and lower the feed teeth.
2. Place the fabric, multipurpose tool/button reed and
button under the ankle with the holes in the button lined
up with the swing of the needle. Check the swing of the
needle by pressing the mirror side to side button to be
sure the needle will not hit the button. Bring the needle
down into the holes of the button with the hand wheel
to verify.
Note: The recommended width of 3.0 is set for most buttons. If you
sew a tiny button or a very large coat button, decrease (–) or increase
(+) the stitch width until the swing of the needle sews in the holes of
the button.
3. Set the number of stitches to sew on the button by
pressing the up and down arrow buttons. Six to eight
stitches is normal.
4. Press the foot control. The sewing machine will sew the
number of stitches set on the display and then tie off
and stop.
5. Raise feed teeth when button sewing is completed.
Tip: Place the thin end of the multipurpose tool/button reed under
the button when sewing on light fabrics. Use the thick end for heavier
fabrics. Hold in place on the fabric with transparent tape.
1:9 Sew on button
Fabric: All types of fabric.
Select: The fabric you are using and
the stitch for sewing on buttons, 1:9.
Use: The needle recommended for
your fabric. Do not use a presser
foot.
Lower the feed teeth.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info