518172
36
Zoom out
Zoom in
Previous page
1/48
Next page
36 – Basic Sewing Te nique
SEWING BUTTONHOLES
The buttonholes in your sewing machine are specially
adjusted for different kinds of fabric and garments. Look
at the stitch table on the last pages in this book to À nd
descriptions of each buttonhole.
The Exclusive SEWING ADVISOR™ feature will select
the best buttonhole and stitch settings for your fabric.
Fabric should be interfaced and/or stabilized where
buttonholes are to be sewn.
Automatic One-Step Sensor Buttonholes
When you select a buttonhole stitch with the Sensor One-
Step Buttonhole Foot connected, you will be able to set
the size of the button on the GraphicDisplay using the
up and down arrow buttons. When sewing, your sewing
machine automatically sews the buttonhole long enough to
À t the selected button size. Because the Sensor One-Step
Buttonhole Foot measures as it sews, every buttonhole will
be the same size.
Note: The buttonhole size will vary with the thickness and style of
your button. Always stitch a sample buttonhole on scrap fabric À rst.
1. Attach the Sensor One-Step Buttonhole Foot.
2. Plug the cord into the socket above the needle area,
behind the light bulb.
3. Measure the button diameter using the button
measuring chart on the front of the machine.
4. Use the up and down arrow buttons to set the button
size on the GraphicDisplay. The size can be set between
0-50 mm.
5. Place the fabric and stabilizer under the Sensor One-
Step Buttonhole Foot. The measurement wheel can
be raised by lifting it, which makes it easier to place
the fabric under the presser foot. Use the markings on
the left toe of the Sensor One-Step Buttonhole Foot
to position the garment edge. Place the edge of the
garment at the middle mark to have 5/8’’ (15 mm) from
the edge to the buttonhole.
6. Before sewing, line up white area on the side of the red
wheel with the white marking line on the foot.
7. Step on the foot control. The Sensor One-Step
Buttonhole Foot lowers automatically. A straight stitch
is sewn away from you stabilizing the left buttonhole
column, then the satin column is sewn toward you. This
is repeated for the right column. The bartacks are also
sewn automatically. The arrows on the GraphicDisplay
will show when each part of the buttonhole is sewn
and in what direction. Keep the foot control depressed
until the buttonhole is À nished. The machine will stop
automatically when the buttonhole is complete.
1:0, 1:23, 1:25, 1:26, 1:27 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using and the
Buttonhole technique (The Exclusive
SEWING ADVISOR™ feature selects a
buttonhole suitable for your fabric).
Use: The Sensor One-Step Buttonhole Foot
and the needle recommended for your fabric.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info