518172
40
Zoom out
Zoom in
Previous page
1/48
Next page
40 – Basic Sewing Te nique
FREE MOTION QUILTING
Free Motion Floating
When sewing free motion at a low speed, the foot will raise and lower with each stitch to hold the fabric on the stitch plate
while the stitch is being formed. When sewing at a high speed, the foot Á oats over the fabric while sewing. The feed teeth
must be lowered and the fabric is moved manually.
Most free motion sewing is stitched with a straight stitch or zig zag stitch. However, all stitches can be sewn in free motion
mode. The direction and speed with which you move the fabric will determine how the stitch will look.
Note: Free Motion Spring Action – If you are using the optional Free Motion Spring Action presser foot, set the machine in Free Motion
Spring Action mode. The “Drop Feed Teeth” recommendation will be activated. Lower the feed teeth. The setting remains when the machine is
turned off. A pop-up message reminds you of the setting when you turn on the machine. Close the pop-up message by pressing OK. For normal
sewing, turn off the Free Motion Spring Action mode in the SET menu.
The Free Motion Spring Action presser foot follows the up-and-down movement of the needle with the help of the
spring and the arm on the presser foot. The feed teeth must be lowered and the fabric is moved manually.
Tip: Use the optional Open Toe Free Motion Spring foot.
1:1 Free Motion Stippling
Fabric: Woven medium with
batting underneath.
Select: Woven medium on The
Exclusive SEWING ADVISOR™,
Straight Stitch 1, FreeM Floating
in the Machine SET menu. Touch
OK. Touch SET Menu to return to
sewing mode. Lower feed teeth.
Use: Presser Foot R and size 80
needle as recommended.
Free Motion Stippling
You will have to move the fabric manually.
1. Select NEEDLE UP/DOWN to put the
needle down.
2. Sew at a constant medium speed, moving the fabric
randomly. Try drawing squiggles with the needle as you
sew. Free motion stippling is usually a random wavy
stitching that should be fairly close together but not
crossing. The stitching should look like puzzle pieces.
Tip: Use the optional Open Toe Stippling Foot for better visibility
when free motion stippling.
Note: To set the machine to regular sewing mode go to SET Menu. Touch
OK to deselect Free Motion setting. Touch SET Menu to exit.
MORE SEWING TECHNIQUES
Find instructions for many more sewing techniques on the HUSQVARNA VIKING® Internet web site.
Enter www.husqvarnaviking.com and go to Sewing, Sewing Room, Sewing Techniques.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info