Manual Husqvarna ST 427T (page 13 of 200) (English, German, Dutch, French, Italian, Spanish)

734468

Zoom out

Zoom in

1/200

6. Turn the ON/OFF key to START. When the engine

starts, release the key.

CAUTION: Do not run the starter for

more than 5 seconds each time you try

to start. Wait 5 to 10 seconds between

each try.

7. Run the engine 2-3 minutes at very low speed before

you start to throw snow.

To operate the product

CAUTION: Do not partially engage drive or

auger levers for an extended period of time;

this can lead to premature wear or burning

of the belts.

Note: When both the drive engagement and auger

engagement are engaged, the drive engagement will

lock the auger engagement in position. Use the right

hand to control the snow discharge chute.

1. To engage the auger blades, push the auger

engagement (A) to the handle to engage the auger

and throw snow.

2. Raise the drive speed control lever (C) from the

middle position to make the product move forward

when the drive engagement (B) is engaged.

3. Lower the drive speed control lever from the middle

position to make the product move rearward when

the drive engagement is engaged.

4. To make the product move in the selected direction,

hold the drive engagement against the handle .

5. If the product has power steering, hold the left

steering trigger (D) to turn left. Hold the right steering

trigger to turn right.

Throttle control

Note: If the snow is wet or heavy, use the fast or boost

modes.

The throttle control adjusts the engine speed. It has 3

modes: boost, fast and slow.

891 - 005 - 08.01.2020 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 427T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 427T Manual

Product: