Manual Husqvarna ST 424T, (page 25 of 200) (English, German, Dutch, French, Italian, Spanish)

734467

Zoom out

Zoom in

1/200

2. Turn the cable adjusters until the discharge chute

points straight forward, and the cables are tight.

3. Loosen the cable adjusters ¼ turn to make the

cables less tight.

To remove the wheels

1. Remove the wheel pin (A) and the retainer pin (B).

2. Remove the wheel from the axle (C).

To adjust the tension of the continuous

tracks (for ST 424T/427T/430T only)

Note: Tools that are necessary for this task: a 9/16"

deep socket, a 9/16" wrench and a 5 kg (10 lbs) weight.

1. Loosen the locking screw (A) 1 turn.

2. Remove the rear locknut (B) to give access to the

adjustment nut.

3. Put a 5 kg (10 lbs) weight (C) on top of the

continuous track, in the center between the 2

wheels.

4. Turn the adjustment nut (B) until the distance (D)

between the continuous track and the steel plate is

between 3.175 and 6.350 mm (0.125 and 0.250 in).

wide.

10lb

5. Attach the locking screw (A) and then the rear

locknut (B).

To clean the product

• Clean plastic parts with a clean and dry cloth.

• Do not use a high pressure washer to clean the

product.

• Do not flush water directly on the motor.

891 - 005 - 08.01.2020 25

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 424T, in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 424T, Manual

Product: