734467
24
Zoom out
Zoom in
Previous page
1/200
Next page
2. Loosen the idler pulley nut (A).
B
A
3. Move the idler pulley (B) in the direction of the auger
belt to increase the belt tension. Move it away from
the auger belt to decrease the belt tension.
4. Tighten the idler pulley nut (A).
5. Have the assistant stay 3 m (10 feet) in front of the
product to monitor the movement of the auger.
6. Push and then release the auger engagement to
start and stop the auger.
7. Measure the time for the auger to stop moving. If the
auger stops after more than 5 seconds, release the
belt tension.
8. When the auger stops moving after less than 5
seconds, install the belt cover. See
To install the belt
cover on page 22
.
To adjust the auger control cable
1. Remove the cable cover on the right hand side of the
frame (D).
B
B
D
2. To remove slack from the auger control cable,
unscrew the bottom jam nut (B) and tighten the top
jam nut (B) until the auger belt tension has
increased.
3. Retest the auger engagement. Repeat adjustment
as needed until only a small amount of slack remains
in the cable when the lever is disengaged.
4. Tighten the bottom jam nut to lock in the tension.
Note: You may also tension the auger belt by
adjusting the idler pulley as a secondary option. If
the adjustment does not resolve the problem,
replace the auger belt. See
To install the auger belt
on page 23
.
To adjust the release cable of the
discharge chute
1. To adjust the release cable, turn the cable adjuster
until the release lever of the discharge chute does
not move freely.
To adjust the left and right discharge
chute cables
1. Put the discharge chute lever in the center position.
24 891 - 005 - 08.01.2020
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna ST 424T, at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 424T, in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info