518170
18
Zoom out
Zoom in
Previous page
1/64
Next page
18
Functions and InfoDisplay
Memory - position
These buttons are used to
advance or return within
a memory, when entering or checking
stitches. See page 20.
Thread tension - adjustment
Use these buttons to
adjust the thread tension
manually. The adjustment affects
all stitches and will remain until the
machine is turned off.
CLR - Deleting stitches
This button is used while in
PROG if you wish to delete
what you have programmed. See page
24.
After À nishing your embroidery
sewing, touch the CLR button.
The embroidery arm returns to ready
position.
Memory - number
The machine has 4 different
program memories. Each
memory will hold up to 55 stitches or
letters. The button is used to advance
to the memory required in PROG or
REP. The number is shown on the
display to the upper right. See page 20.
Not used when sewing
embroideries.
Buttonhole sensor foot
When you plug the buttonhole sensor
foot into the machine and place the
white À eld of the measurement wheel
against the white mark, the symbol
will show brightly on the display.
See page 47.
Recommended presser foot
The letter shows which presser foot is
correct for the stitch you have selected.
The corresponding letter is on the
presser foot.
Functions and Infodisplay
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info