Manual Husqvarna SCANDINAVIA 400 (page 16 of 64) (English)

518170

Zoom out

Zoom in

1/64

Functions and InfoDisplay

Functions and Infodisplay

Needle stop

This button sets whether the

needle stops up or down in the

material when you lift your foot from

the foot control and stop sewing. Point

the arrow upwards - the needle will

stop in the up position. When you

touch the button so that the arrow

points downward, the machine will

stop with the needle in the material.

You can also regulate the needle stop

position with the foot control. To raise

or lower the needle after stopping,

lightly tap the foot control.

When sewing embroideries only

the up position can be used.

Sewing speed

Use the SPEED button to set

the three different maximum

speeds. The machine will sew at

different maximum speeds when the

foot control is fully depressed. For

slower speeds within the range simply

press the foot control less.

When Embroidery position is

set, only the slowest speed can be

selected.

All stitches in the machine have a pre-

set maximum speed at which they can

be sewn. When you select a stitch the

machine automatically sets the correct

maximum speed.

Reverse

Your machine sews backwards

when this button is pressed.

The machine sews forward

when the button is released. The

longest stitch length when reverse

feeding is 3 mm.

For permanent reverse, press the

button twice in quick succession

before starting to sew. An arrow

to the top left on the display indicates

reverse sewing. To sew forward again,

press the button once more.

The reverse button is also used

when starting and stopping the

Embroidery unit, (the foot control can

also be used).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SCANDINAVIA 400 Manual

Product: