518170
17
Zoom out
Zoom in
Previous page
1/64
Next page
17
Functions and InfoDisplay
Stitch length
When you select a stitch, the
machine will automatically set
the best stitch length which will
be indicated by numbers on the
Infodisplay. You can change the stitch
length by pressing either the (+) or (-)
button. Certain stitches have a limited
stitch length. Not active in REP
position.
When sewing embroideries the
length can be set between 2 and 6
to change size of embroidery.
STOP
The STOP button is used to
À nish a stitch. i.e. the machine
fastens the thread and stops
automatically when the stitch
has been completed. The symbol
on the display indicates that STOP is
selected. STOP is cancelled when you
press the button again or by selecting a
new stitch.
The button has the same function both
in NORM and REP position.
(See "Satin taper...", page 24, STOP,
page 23.
Embroidery sewing without thread
color change, see page 34.
Mirror image
You can mirror a stitch by using
the buttons
, mirror image
side to side and
, mirror image
end to end. The symbols will be
displayed.
When sewing embroideries only
mirror image side to side can be
used.
Stitch width
When you select a stitch, the
machine automatically sets
the best stitch width which is
displayed with numbers on the
Infodisplay. You can change the stitch
width by pressing the (+) or (-) button.
The width can be adjusted between
0 and 6 mm. Not active in REP
position.
When sewing embroideries the
width can be set between 2 and 6,
to change size of embroidery.
MENU - Selected group of stitches
Your machine has three menus
- one for stitches, two for letters.
Your choice is displayed when you
have pressed the MENU button to
select stitches
, outline block letters
or script letters . The stitch
number or the selected letter will also
be displayed.
When sewing embroideries the
menu number will be displayed to
the upper right.
FUNC - Selected function
When you turn on the machine,
the selected function displays
NORM. Touch the FUNC button to
PROG for programming. If you touch
the button again, REP = repeat will
be displayed to sew your programmed
stitches. After a third touch, NORM is
displayed again.
Not used when sewing
embroideries.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info