518170

Husqvarna SCANDINAVIA 400 Manual

13
Zoom out
Zoom in
Previous page
1/64
Next page
13
2
1
3
Learn your Scandinavia 400
Correct and incorrect thread
tension
To understand the correct thread
tension, sew a few sample stitches at
different settings.
Adjust tension only with the
function buttons (see pa
ge 18). Do
not turn dial.
1. Begin with a tension that is too
loose, i.e. set at "1". The lower
thread will lie straight and the
upper thread will be drawn down
on the underside.
2. If you set the tension at the highest
number, the opposite will occur,
and the seam may pucker.
3. When thread tension is correctly
set the threads interlock in the
middle of both layers of material
or, in the case of decorative
stitches, on the underside.
Note! Make a few tests on a scrap
piece of the ma te ri al you are going to
sew and check the tension.
Lowering the feed teeth
The feed teeth are lowered
automatically when the embroidery
unit is in place.
When removing the embroidery unit,
the feed teeth will raise as you start to
sew.
The feed teeth are lowered when you
turn the dial to the left to
. Turn
the dial to the right to
if you
wish to raise the feed teeth. The feed
teeth will not come up until you begin
to sew.
Lower the feed teeth for sewing
buttons and for free motion quilting
and embroidery.
By lowering the feed teeth it is easier
to get thick garments under the presser
foot. Do not forget to raise the feed
teeth before starting to sew.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info