Manual Husqvarna SCANDINAVIA 400 (page 11 of 64) (English)

518170

Zoom out

Zoom in

1/64

Learn your Scandinavia 400

Bobbin winding from the

needle

Make sure that the presser foot is

up and the needle is in the highest

po si tion.

Note! Do not use a plastic presser

foot when bobbin winding.

1. Place your empty bobbin with the

small mark

outwards on the

bobbin spindle on the front of the

machine.

2. Pull the thread from the needle

under the presser foot and to the

right over the thread guide (c).

3. Start from above and wind a few

turns of thread around the bob bin.

Cut off the thread on the thread

cutter (d).

4. Bring the bobbin spindle down.

Press the foot control. When the

bobbin winding is À nished, the

bobbin will stop automatically.

Remove the bobbin, cut off the

thread and bring the bobbin

spindle up.

Bobbin winding - vertical

spool pin

1. Place an empty bobbin with the

mark

outwards on the bobbin

spindle on the front of the

machine.

2. Place the large spool holder under

the thread on the spool pin.

3. Bring the thread under the thread

guide (a) and over thread guide (b),

then around thread guide (c) as

illustrated.

4. From above wind a few turns of

thread aro und the bobbin and into

the cutter.

Note! We do not recommend

winding specialty threads such as

clear nylon or other stretchy threads

through the needle. Instead see

"Bob bin winding - vertical spool pin"

below.

5. Bring the bobbin spindle down.

Press the foot control. When the

bobbin winding is À nished, the

bobbin will stop automatically.

Remove the bob bin, cut off the

thread and bring the bobbin

spindle up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SCANDINAVIA 400 Manual

Product: