518170
12
Zoom out
Zoom in
Previous page
1/64
Next page
12
1
2
10 15
a
2
b
c
1
34
Learn your Scandinavia 400
Top thread tension
The thread tension is adjusted
automatically when you select a stitch
or an embroidery. This is shown by the
thread tension indicator being reset.
Do not turn this dial manually!
You can adjust the thread
tension by pressing the
buttons, see page 18. Using the
button (-) you decrease the tension
and using the button (+) you increase
the tension. The adjustment affects
all stitches and will remain until the
machine is turned off or until changed
manually.
Normal thread tension is 4.
When selecting buttonholes and
decorative stitches and for embroidery
the thread ten sion is reduced
automatically.
Threading lower thread
!
Turn off the main switch.
1. Open the cover by slightly pulling
it towards you and take it away.
2. Place the bobbin in the bobbin
case with the mark
facing
upward and the thread to the left
of the bobbin. The bobbin will
then rotate counter clockwise when
pulling the thread.
3. Hold the bobbin and pull the
thread to the right passing (a).
4. Hold the thread tight and pull it
to the left so that the thread falls
correctly into the tension spring.
Continue threading around (b) and
to the right of the thread cutter (c).
Replace the cover and slide it into
position. Then pull the thread to
the left to cut it.
When topstitching with a heavy thread
in thick fabric, increase the tension to
7-9.
When the machine is turned on, the
tension is set to normal automatically.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info