510448
16
Zoom out
Zoom in
Previous page
1/56
Next page
16
1
2
3
E
F
G
12
34
I
H
Getting ready to sew
Inserting the bobbin
Press the ON/OFF switch to OFF.
1. Remove the bobbin cover by sliding it towards you.
2. Place the bobbin in the bobbin case. It drops in only one way
with the logo facing up. The thread unreels from the left of
the bobbin. The bobbin will then rotate counter-clockwise
when you pull the thread.
3. Place your À nger on the bobbin to keep it from turning as you
pull the thread À rmly to the right and then to the left into the
tension spring (E) until it “clicks” into place.
4. Continue threading around (F) and to the right of the thread
cutter (G). Slide on the bobbin cover (H). Pull the thread to
the left to cut (I).
Thread tension, 835/855
Use the recommended top thread tension setting given on the
GraphicDisplay. You might need to adjust the top thread tension
for special threads, fabrics and/or techniques. To set the tension,
turn the numbered tension dial. The higher the number the
tighter the tension.
Normally top thread tension is set to around 4. When sewing
buttonholes and decorative stitches set thread tension to around
3. When topstitching with a heavy thread in thick fabric, increase
the tension to 7-9.
Make a few tests on a scrap piece of the fabric you are going to
sew and check the tension.
Correct and incorrect thread tension
To understand the correct thread tension, sew a few sample
straight stitches at different settings.
1. Begin with a tension that is too loose, i.e. set at the lowest
number. The bobbin thread will lie straight and the top thread
will be drawn to the underside of the fabric.
2. If you set the tension at the highest number, the bobbin
thread will be visible on the top side of the fabric. The seam
may pucker and the top thread might break.
3. The correct thread tension is set when the threads interlock
in between both fabric layers or, in the case of decorative
stitches, on the underside.
Automatic thread tension, 875 Quilt
The 875 Quilt model automatically sets the best thread tension
for the selected stitch and fabric. Go to the SET Menu to adjust
the thread tension for specialty thread, techniques or fabric (see
page 29).
16


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-875-quilt

Reset search

  • How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 875 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info