Manual Husqvarna SAPPHIRE 875 Quilt (page 14 of 56) (English)

510448

Zoom out

Zoom in

1/56

Getting ready to sew

Threading for twin needles

Press the ON/OFF switch to OFF.

1. Insert a twin needle.

2. Use a second thread spool or wind a bobbin with the thread

you are going to use as the second upper thread.

3. Lift the spool pin up and all the way to the right. Lock the

spool pin in the vertical position by slightly pressing it down.

Slide on the large spool cap. For spools smaller than the

medium size spool cap, place a felt pad under the thread

spool.

4. Place the À rst thread spool on the spool pin. The spool

should rotate in a clockwise direction when the thread reels

off the spool.

LEFT NEEDLE: Thread the machine as described on page 13.

Check to ensure that the thread lies between the left thread

tension discs (A). Thread the left needle manually.

6. Pull out the auxiliary spool pin and slide on the large spool

cap. For spools smaller than the medium size spool cap, place

a felt pad under the thread spool.

7. Place the second thread on the spool pin. The second spool

should rotate in a counterclockwise direction when the thread

reels off the spool.

8. RIGHT NEEDLE: Thread the machine as before but this thread

should lie between the right thread tension discs (A) and

outside the needle thread guide (B). Thread the right needle

manually.

NOTE: Only use symmetrical twin needles (C). Do not

use this type of twin needle (D), since it may damage your

sewing machine.

Winding the bobbin with the

machine threaded

Make sure that the presser foot is up and the needle is in the

highest position.

Note! Do not use a plastic presser foot when bobbin winding.

1. Place an empty bobbin on the bobbin spindle on the top

of the machine. The bobbin only À ts on one way, with the

logo facing up. Use only original HUSQVARNA VIKING®

bobbins.

2. Pull the thread from the needle under the presser foot and to

the right through the thread guide (C).

3. Guide the thread through the hole in the bobbin (D) from the

inside to the outside.

NOTE: When using an earlier version of HUSQVARNA

VIKING® bobbins that do not have a hole, wind several

turns of thread on the bobbin to get started.

4. Push the bobbin spindle to the right. A pop-up message

appears on the GraphicDisplay. Press the foot control to start

winding. Hold the end of the thread À rmly when starting to

wind. Once the bobbin begins to wind, cut the excess thread.

When the bobbin is full, it will stop automatically. Push the

bobbin spindle back to the left, remove the bobbin and cut

off the thread on the thread cutter.

How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SAPPHIRE 875 Quilt Manual

Product: