510448
15
Zoom out
Zoom in
Previous page
1/56
Next page
15
1
A
B
C
A
B
C
D
Getting ready to sew
Winding the bobbin using the vertical
spool pin
1. Place an empty bobbin on the bobbin spindle on the top
of the machine. The bobbin only À ts on one way, with the
logo facing up. Use only original HUSQVARNA VIKING®
bobbins.
2. Place the large spool holder and a felt pad under the spool on
the main spool pin set in the vertical position.
3. Bring the thread over and behind the pre-tension thread
guide (A) and down around the thread tension disc (B), then
through thread guide (C) as illustrated.
4. Guide the thread through the hole in the bobbin (D) from the
inside to the outside.
5. Push the bobbin spindle to the right. A pop-up message
appears on the GraphicDisplay. Press the foot control to start
winding. Hold the end of the thread À rmly when starting to
wind. Once the bobbin begins to wind, cut the excess thread.
When the bobbin is full, it will stop automatically. Push the
bobbin spindle back to the left, remove the bobbin and cut
off the thread on the thread cutter.
Winding the bobbin using the auxiliary
spool pin
1. Place an empty bobbin on the bobbin spindle on the top
of the machine. The bobbin only À ts on one way, with the
logo facing up. Use only original HUSQVARNA VIKING®
bobbins.
2. Fold out the auxiliary spool pin. Place a large spool holder and
a felt pad under the spool.
3. Bring the thread over and behind the pre-tension thread
guide (A) and down around the thread tension disc (B), then
through thread guide (C) as illustrated.
4. Guide the thread through the hole in the bobbin (D) from the
inside to the outside.
5. Push the bobbin spindle to the right. A pop-up message
appears on the GraphicDisplay. Press the foot control to start
winding. Hold the end of the thread À rmly when starting to
wind. Once the bobbin begins to wind, cut the excess thread.
When the bobbin is full, it will stop automatically. Push the
bobbin spindle back to the left, remove the bobbin and cut
off the thread on the thread cutter.
NOTE: Depending on the type of thread, wrap the
thread one or two turns around the bobbin thread
tension disc (B) to put more tension on the thread.
NOTE: When using an earlier version of HUSQVARNA
VIKING® bobbins that do not have a hole, wind several
turns of thread on the bobbin to get started.
15


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-875-quilt

Reset search

  • How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 875 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info