610265

Husqvarna Prisma 940 Manual

11
Zoom out
Zoom in
Previous page
1/62
Next page
Threading,
thread
tension
Threading
the
lower
thread
When
the
bobbin
winding
is
finished,
place
the
bobbin
beside
its
case
with
the
marking
upward.
The
thread
should
run
as
shown
in
the
figure.
Place
the
bobbin
in
its
case
without
turning
it
around.
Slide
the
thread
into
the
slot
on
the
edge
of
the
bobbin
case.
Pull
the
thread
in
under
the
tension
spring.
Check
that
the
bobbin
rotates
in
the
direction
of
the
arrow
(clockwise)
when
the
thread
is
pulled.
The
thread
must
be
pulled
in
the
direction
of
the
spring,
otherwise
the
spring
will
be
overloaded.
Insertion
of
the
bobbin
case
Slide
the
thread
behind
the
projection
of
the
bobbin
case
and
to
the
right.
Put
the
bobbin
case
into
place.
Press
the
bobbin
case
until
it
clicks
to
ensure
that
it
fits
properly.
The
thread
cutter
is
located
to
the
left
of
the
bobbin
case.
Hold
the
thread
end
and
draw
the
thread
from
underneath
and
up
toward
the
thread
cutter.
By
doing
so
the
thread
will
be
cut
off
and
kept
in
place.
Shut
the
door.
Threading
the
upper
thread
Raise
the
presser
foot.
Check
that
the
needle
is
at
its
highest
position.
Place the
spool
of
thread
on
the
left
spool
pin
and
thread
the
machine
for
sewing.
Slide
the
thread
into
thread
guide
2
on
the
upper
arm
and
draw
it
upward.
Then
draw
the
thread
to
the
front
between
the
tension
discs
3
and
down
around
thread
guide
4.
Continue
threading
by
drawing
the
thread
from
the
right
into
the
slot
on
thread
take-up
lever
5
and
draw
it
down
to
the
needle,
ensuring
that
it
goes
through
thread
guide
6.
Thread
the
needle
from
the
front.
Due
to
the
white
color
of
the
presser
foot
ankle
the
needle-eye
is
clearly
seen
and
the
threading
of
the
needle,
7,
is
easier.
Pull
the
thread
under
the
presser
foot
about
15
cm
(6’)
toward
the
rear.
I
fl
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prisma-940

Reset search

  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamadlajevardi@gmail.com Submitted on 15-12-2022 at 17:49

    Reply Report abuse

  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamad lajevardi@gmail.com Submitted on 15-12-2022 at 17:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prisma 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prisma 940 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info