610265

Husqvarna Prisma 940 Manual

10
Zoom out
Zoom in
Previous page
1/62
Next page
Bobbin
winding
Removing
the
bobbin
case
Open
the
door
in
front
of
the
shuttle
by
means
of
the
small
recess
on
the
left
side.
Grip
the
bobbin
case
with
the
thumb
and
index
finger
so
that
the
latch
is
depressed
and
pull
the
bobbin
case
out.
The
bobbin
will
remain
in
the
case
as
long
as
the
latch
is
depressed.
When
you
release
the
latch,
the
bob
bin
will
be
released.
Bobbin
winding
Turn
the
empty
bobbin
until
the
small
round
dot
on
one
side
is
outward.
Slide
the
bobbin
onto
the
bobbin
spindle,
which
is
located
on
the
right
side
of
the
machine.
Threading
for
bobbin
winding
can
be
done
as
illus
trated
in
the
upper
picture.
If
you
do
not
want
to
unthread
the
machine,
raise
the
presser
foot
and
thread
the
machine
as
illustrated
in
the
lower
picture.
Do
not
draw
the
thread
straight
from
the
needle
eye,
otherwise
the
needle
may
get
bent.
Run
the
thread
in
the
thread
guide
at
the
front
of
the
machine.
Start
from
underneath
and
wind
the
thread
around
the
bobbin
a
few
times.
Hold
the
end
of
the
thread
while
you
press
down
the
foot
control.
Release
the
thread
end
as
SOOfl
as
winding
starts.
The
machme
will
stop
automatically
when
the
bobbin
is
full.
10
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prisma-940

Reset search

  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamadlajevardi@gmail.com Submitted on 15-12-2022 at 17:49

    Reply Report abuse

  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamad lajevardi@gmail.com Submitted on 15-12-2022 at 17:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prisma 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prisma 940 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info