610264

Husqvarna Prelude 360 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
I
Bobbin
Winding
—
Vertical
Spool
Pin
I’rncethues
1.
Place
an
empty
bobbin
with
the
mark
out-wards
on
the
bobbin
spindle
and
bring
it
down.
2.
Place
the
large
spool
holder
under
the
thread
on
the
spool
pin.
3.
Bring
the
thread
under
the
thread
guide
(a)
and
over
thread
guide
(b),
further
under
thread
guide
(c).
4.
From
above
wind
a
few
turns
of
thread
around
the
bobbin
and
into
the
knife.
5.
As
“4.”
above.
I
Placing
the
Bobbin
in
the
Machine
1.
Remove
the
bobbin
cover
by
sliding
it
towards
you.
2.
Place
the
bobbin
in
the
bobbin
case
with
the
mark
facing
up
and
the
thread
to
the
left
of
the
bobbin.
The
bobbin
will
then
rotate
counter
clockwise
while
pul
ling
out
the
thread.
3.
Place
your
finger
on
the
bobbin
to
keep
it
from
turning
as
you
pull
the
thread
firmly
to
the
right
and
then
to
the
left
into
the
tension
spring
(a)
until
it
“clicks”
into
place.
4.
Continue
threading
around
(h)
and
to
the
right
of
and
then
left
into
the
thread
cutter
(c).
Replace
the
cover
(1).
Pull
the
thread
to
the
left
to
cut
it
(2).
8
4’
C.
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prelude-360

Reset search

  • How do I change from buttonhole mode to straight sewing. Machine will only sew a very short stitch. Submitted on 20-9-2023 at 04:41

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360? Submitted on 3-8-2022 at 02:23

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360 Submitted on 3-8-2022 at 02:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prelude 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prelude 360 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info