Manual Husqvarna Prelude 360 (page 12 of 32) (English)

610264

Zoom out

Zoom in

1/32

Changing

the

Need’e

Loosen

the

screw

the

needle

clamp

with

the

screwdriver.

Remove

the

needle.

Push

the

new

needle

with

the

flat

side

away

from

you

until

will

further.

Use

the

screwdriver

tighten

the

screw

properly.

Always

use

needles

system

130/705H.

I—

Changing

the

Presser

Foot

Make

sure

that

the

needle

the

highest

position.

Pull

the

presser

foot

towards

you.

Line

the

cross

the

foot

between

the

spring

and

the

presser

foot

ankle.

Press

back

until

the

toot

snaps

into

place.

Presser

Foot

Pressure

The

presser

foot

pressure

adjusted

with

the

dial

the

front

the

machine.

Normal

setting

The

higher

the

number

the

pressure

the

fabric.

Knit

and

Soft

fabrics

should

sewn

low

pressure.

Presser

Foot

Lever

The

presser

foot

raised

and

lowered

with

the

presser

foot

lever.

The

presser

foot

must

lowered

when

sewing.

raising

the

presser

foot

lever

far

goes

and

holding

there,

the

lift

height

the

presser

foot

can

increased

sev

eral

millimeters.

This

useful

when

sewing

heavy

materials.

//U•\\

‘if

How do I change from buttonhole mode to straight sewing. Machine will only sew a very short stitch. Submitted on 20-9-2023 at 04:41
Reply Report abuse
How do I lower the feed teeth on Husqvarna Viking prelude 360? Submitted on 3-8-2022 at 02:23
Reply Report abuse
- Read page 11 of the manual!
  It is all there. Answered on 20-3-2024 at 14:14
  Vote up Report abuse
How do I lower the feed teeth on Husqvarna Viking prelude 360 Submitted on 3-8-2022 at 02:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prelude 360 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Prelude 360 Manual

Product: