517444
24
Zoom out
Zoom in
Previous page
1/34
Next page
24
Check Tension
Check the tension of the bobbin by resting the loaded bobbin case
in the palm of your hand. Pull the tail of thread and watch as the
thread ows out of the bobbin case. A slight bounce should cause
the bobbin case to slide down the thread. If the thread slides out of
the case as you pick it up, it needs more tension. If it barely moves
down the thread or doesn’t move at all, it needs less tension
(g 34)
Adjust Tension
1. Use a small screwdriver to turn the largest set screw on the
bobbin case to adjust tension (g. 35).
2. Make very small adjustments.
3. Be very careful not to remove the screw as it is very small and
difcult to nd if lost.
4. Remember, right (clockwise) tight, left (counter clockwise)
loose.
Place Bobbin into Machine
1. Insert the bobbin into the bobbin case. The bobbin can be
placed into the bobbin case in either direction, but you should
be consistent.
2. Holding the bobbin case pull the thread through the slot and
under the tension spring.
3. Place the bobbin case in the machine. Always listen for the
click as it engages into the machine (g. 36).
It is recommended to use a soft bristle brush to wipe out the bobbin
case and the bobbin area. It is not recommended to use canned air
as it will only blow the lint around.
TIP: Lint has a tendency to build up in the bobbin case
especially with cotton threads. Check the bobbin case each
time you change a bobbin to keep it clean.
Fig. 34
Fig. 35
Fig. 36
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 3000 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info