Manual Husqvarna Platinum 3000 (page 26 of 34) (English)

517444

Zoom out

Zoom in

1/34

Your Platinum

3000 is capable of sewing with many types of

threads. One thing to keep in mind is this machine is an industrial

machine, so very light threads will be harder to use than the more

traditional machine quilting threads. To use other threads you will

need to adjust the tension and slow down.

1. Place a cone of thread on the thread holder.

2. Place the thread in the thread guide directly above the spool of

thread (g. 37).

3. Thread upper thread guide (g 38) and side thread guide (g. 39) if

you use all three holes it will add drag/tension to the thread.

4. Raise your presser foot. Take thread between the two tension discs

from back to front all the way around.

5. While holding the thread up over the top of the tension assembly,

hook the check spring. The tension spring should come down as

you pull thread downward (g. 40).

6. Place thread under the silver angle bracket (g. 41).

7. Bring the thread up to thread guide #6 above the tension

assembly. You will be able to slide the thread into this thread guide

(g. 42).

8. Thread the take up lever from back to front (g. 43).

9. Bring the thread down the front of the machine snapping the thread

into thread guide #8 and thread guide #9 on the way down to the

needle (g. 44 & g. 45).

10. Put the thread thru the Thread eyelet above the needle (g. 46).

11. Thread the needle from the front to the back of the needle (g. 47).

Fig. 37

Fig. 38 Fig. 39

Fig. 40 Fig. 41

Fig. 42 Fig. 43

Fig. 44 Fig. 45

Fig. 46

Fig. 47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 3000 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Platinum 3000 Manual

Product: