517444

Husqvarna Platinum 3000 Manual

22
Zoom out
Zoom in
Previous page
1/34
Next page
22
Routine Cleaning and Oiling
Routine cleaning and oiling is very important to the longevity of your quilting machine. Brush out the
lint from around the hook and foot. We recommend changing your needle every 8 hours of use. A
worn needle can cause skipped stitches, shredded thread and poor stitch quality.
Lint has a tendency to build up in the bobbin case. A tiny amount of lint can cause poor stitch quality.
Check the bobbin case every time you change the bobbin to keep it clean. We suggest using a soft
bristle brush to wipe out the bobbin case and the bobbin area. We do not recommend using canned
air, as it only blows the lint around. By using a soft bristle brush you collect the dust on the brush.
Keep your table clean of dust and oil. Clean the track and carriage wheels regularly with a soft cloth
to ensure smooth movement.
Oiling is extremely important to the longevity of your quilting machine. Failure to oil your machine
regularly can void your warranty.
Recommended oiling:
After every nished quilt place 3 to 4 drops of oil in the hole on the top of the machine indicated with a
red circle (g. 27). The other location is the oil dip stick found on the bed of the machine (g. 28) near
the needle area. Remove the dipstick, make sure oil is present on the dip stick. If not add 3-4 drops
of oil where you pulled the dip stick out (g. 29)
Insert the dipstick, remove and check for oil on the dipstick. Repeat with 3-4 drops of oil until it shows
on the dipstick. Run the machine to lubricate. Use a clear high grade sewing machine oil.
Fig. 28
Fig. 27
Fig. 29
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 3000 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info