477553
27
Zoom out
Zoom in
Previous page
1/52
Next page
English – 27
Maintenance
Fitting the cutting head
1 Insert the bolts for the link joints and the pins on both
sides.
2 Start the engine and raise the cutting unit to the max
position.
3 Turn off the motor.
4 Fit the pins on both sides.
5 Fit the universal drive shaft.
6 Check the universal drive shaft has enough lubricant.
7 Check and adjust the tilt angle of the cutting unit.
Service position for the cutting unit
The cutting head can be placed in the service position to
provide easy access for cleaning, repairs and servicing. In the
service position the cutting unit is raised and locked in the
vertical position.
Placing in the service position
1 Position the machine on flat ground. Apply the parking
brake.
2 Lower the cutting unit to the float position
3 Turn off the motor.
4 Remove the service hatch.
5 Loosen the two quick connectors on the universal drive
shaft and remove the universal drive shaft.
6 Start the engine and raise the cutting unit until it is slightly
off the ground.
7 Turn off the motor.
8 Remove the pins on both sides.
9 Start the engine and raise the cutting unit to the max
position.
10 Turn off the motor.
11 Lift the front edge of the unit and tilt the cutting unit
upward.
12 Secure the cutting unit with the pin in the anchor point.
13 The cutting unit is in the service position
!
WARNING! Never leave the universal drive
shaft of the machine with one end loose. If
the engine is started, damage can occur.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P520D in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P520D

Husqvarna P520D User Manual - English - 208 pages

Husqvarna P520D User Manual - German - 208 pages

Husqvarna P520D User Manual - German - 56 pages

Husqvarna P520D User Manual - Dutch - 208 pages

Husqvarna P520D User Manual - Dutch - 56 pages

Husqvarna P520D User Manual - French - 208 pages

Husqvarna P520D User Manual - Italian, Portuguese, Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info