477553
26
Zoom out
Zoom in
Previous page
1/52
Next page
26 – English
Maintenance
Check the battery
The machine is equipped with a maintenance-free battery.
The battery has a service window showing different colours.
White = Charge battery
Green = OK.
Red = Change battery.
Clean the battery and holder with soap/water solution.
A discarded or replacement battery should be handled as
hazardous waste.
The Cutting Unit Components
The components mentioned are:
A Pin
B Link joint
C Cutting unit bracket
D Clipping height adjusters
E Universal drive shaft with quick connectors
E Attachment point for service position
G Belt cover
Removing the cutting unit
1 Place the machine on a flat surface and apply the parking
brake.
2 Remove the universal drive shaft completely. Slide the
ring sideways to release the quick coupling and the
universal drive shaft can be pulled from the shaft pin.
3 Start the engine and raise the cutting unit to the max
position.
4 Turn off the motor.
5 Remove the pins on both sides.
6 Lower the cutting unit to the float position
7 Remove the pins from the shafts and remove the shafts
from the link joints.
8 The cutting unit is now free.
!
WARNING! Lead-acid batteries produce
explosive gases. Avoid sparks, open flames
and smoking close to batteries. Always wear
protective glasses in the vicinity of batteries.
!
WARNING! Never leave the universal drive
shaft of the machine with one end loose. If
the engine is started, damage can occur.
!
WARNING! If the help function is connected,
the lift arms move with great force when the
pins are loosened. Observe caution to avoid
trapping your hand.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P520D in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P520D

Husqvarna P520D User Manual - English - 208 pages

Husqvarna P520D User Manual - German - 208 pages

Husqvarna P520D User Manual - German - 56 pages

Husqvarna P520D User Manual - Dutch - 208 pages

Husqvarna P520D User Manual - Dutch - 56 pages

Husqvarna P520D User Manual - French - 208 pages

Husqvarna P520D User Manual - Italian, Portuguese, Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info