733796
37
Zoom out
Zoom in
Previous page
1/72
Next page
4. Move the lever for the auxiliary system forward and
rearward to adjust the cutting height.
Note: The selected cutting height is shown with the
numbers 1-7 on the cutting deck. Refer to the table
below.
5. Adjust the parallelism of the cutting deck. Refer to
To
adjust the parallelism of the cutting deck on page
53
.
Number Cutting height, mm/in
1 30/1.2
2 40/1.6
3 52/2
4 64/2.5
5 76/2.3
6 93/3.7
7 112/4.4
To adjust the cutting height - R180
1. Park the product on level ground.
2. Apply the parking brake.
3. Move the lever for the hydraulic lifting arms rearward
to fully lift the cutting deck.
4. Turn the power key to the STOP position.
5. Remove the locking pin on the adjustment lever for
cutting height.
6. Lift the adjustment lever for cutting height and pull
the lever horizontally. Refer to the table below for
which cutting height that agrees with which number.
7. Attach the locking pin on the adjustment lever for
cutting height.
8. Hold the front wheel with 1 hand and remove the
locking pin with the other hand.
9. Move the distance rings up or down, refer to the
table below. The distance rings have 2 thicknesses,
(A) is 15 mm/0.6 in. thick and (B) is 10 mm/0.4 in.
thick.
A
B
10. Attach the locking pin on top of the front wheel.
11. Do step 8-10 again with the second wheel.
12. Adjust the parallelism of the cutting deck. Refer to
To
adjust the parallelism of the cutting deck on page
55
.
Number Distance rings,
above/below
Cutting height,
mm/in.
1 3xA+3xB/0 30/1.2
2 3xA+2xB/1xB 40/1.6
3 3xA+1xB/2xB 50/2.0
4 3xA/3xB 60/2.4
5 2xA/1xA+3xB 75/3.0
6 1xA/2xA+3xB 90/3.5
1262 - 004 - 04.06.2020 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info