733796
35
Zoom out
Zoom in
Previous page
1/72
Next page
3. Carefully push down 1 of the speed pedals. The
speed increases the more the pedal is pushed down.
Use pedal (A) to move forward, and pedal (B) to
move rearward.
B
A
4. Release the pedal to brake. To brake harder, push
down the other speed pedal.
To lower the cutting deck to the float
position
1. Start the electrical drive. Refer to
To start the
product on page 33
.
2. Move the lever for the hydraulic lifting arms forward
to lower the cutting deck to the float position.
3. Start the hybrid drive. Refer to
To start the product
on page 33
.
4. Pull the PTO button out to engage the drive on the
cutting deck blades.
To lift the cutting deck
1. Start the electrical drive. Refer to
To start the
product on page 33
.
2. If the cutting deck is engaged, push the PTO button
in to disengage the drive on the cutting deck.
3. Move the lever for the hydraulic lifting arms rearward
to lift the cutting deck.
To set the PTO speed
Turn the PTO speed switch to (A), (B) or (C).
A
B
C
(A) Low speed.
(B) Reduced speed.
(C) High speed.
Note: Refer to
Technical data on page 63
for the PTO
speed rpm.
To adjust the ground pressure of the
hydraulic lifting arms
The hydraulic lifting arms has a gas spring that helps to
increase or decrease the ground pressure from the pivot
wheel on the cutting deck.
1. Remove the cutting deck. Refer to
To remove the
cutting deck on page 28
.
2. Apply the parking brake.
1262 - 004 - 04.06.2020 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info