733796
28
Zoom out
Zoom in
Previous page
1/72
Next page
b) For the R180 cutting deck: Attach the lifting
eyelets to the cutting deck (A) with the bolt (B)
and the pin (C).
A
C
B
21. Do a check of the parallelism of the cutting deck.
Refer to
To do a check of the parallelism of the
cutting deck on page 52
and
To do a check of the
parallelism of the cutting deck on page 54
.
To attach the cutting deck - Combi 155
X
1. Do step 1-20 in
To attach the cutting deck - Combi
155, R180 on page 26
.
2. Put the hydraulic hoses from the cutting deck
through the loop.
3. Attach the hydraulic hoses to the coupling on the
product.
Note: The position of the hydraulic hoses controls
the operation function of the cutting height lever. To
change the operation function of the cutting height
lever, change the position of the hydraulic hoses.
To remove the cutting deck
1. Park the product on level ground.
2. Apply the parking brake.
3. Move the lever for the hydraulic lifting arms rearward
to fully lift the cutting deck.
4. Turn the power key to the STOP position.
5. For the Combi 155 X cutting deck, release the
couplings and disconnect the hydraulic hoses.
6. Release the lifting eyelets.
a) For the Combi cutting decks: Pull the spring (A)
to release the lifting eyelets (B) on the cutting
deck.
A
B
b) For the R180 cutting deck: Remove the pin (A)
and the bolt (B) to release the lifting eyelets on
the cutting deck (C).
A
C
B
28 1262 - 004 - 04.06.2020
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info