609737
54
Zoom out
Zoom in
Previous page
1/68
Next page
Woven Heavy and stitch 1:20 (650), 1:23 (670/690Q)
1 2
3 4
52 – Sewing
BARTACK (MANUAL)
Secure elastic ends, drapery pleats, belt loops, and pocket corners
with the same look as ready-to-wear.
1. Place fabric under the presser foot. Lower the presser foot
and press on the foot control to start sewing. Your machine
will sew a straight stitch until you touch Reverse .
2. Your machine will then sew in reverse until you touch reverse
again.
3. Your machine will then sew a zigzag, covering the straight
stitches.
4. Touch Reverse to automatically tie off.
Decorative Tapering Stitches (690Q)
The Decorative Tapering Stitches can be used to taper the stitch
to form corners and points. The Decorative Tapering Stitches are
marked with a blue color in the Stitch panel in the lid.
1. Select a Decorative Tapering Stitch.
2. Press the taperings icon to open the tapering window. The
tapering window has two different tabs; Tapering beginning
and Tapering end. Touch the angle that you want to use in
each tab. Press the arrow in the top left corner to return to
Sewing mode.
3. Icons will appear on the TouchScreen to show you that the
beginning and/or end tapering are activated.
Note: Its important to adjust your settings before starting to sew.
4. Place the fabric under the presser foot.
5. Start sewing. If tapering is activated at both the beginning and
at the end, the machine will sew the tapered point and then
continue with the stitch in the selected stitch width. A reverse
icon is shown on the GraphicDisplay.
6. When the stitch is the length as desired, press the Reverse
button to start the end tapering. When the tapering is
completed the machine stops automatically.
Tip: To repeat a tapering stitch the same size, program the desired number
of stitches, exit programming and then add tapering at the beginning and/
or end.
Note: The Automatic Tapering Stitches (1:37 and 1:38 670/690Q) will
automatically taper the stitch. Follow step 4-5 to sew these stitches. To repeat
these two stitches press the STOP button.
The stich can be tapered.
Tapering beginning activated.
Tapering beginning and end activated.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Opal 690Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Opal 690Q in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Opal 690Q

Husqvarna Opal 690Q User Manual - German - 35 pages

Husqvarna Opal 690Q User Manual - Dutch - 35 pages

Husqvarna Opal 690Q User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info