609737
52
Zoom out
Zoom in
Previous page
1/68
Next page
Button Sewing, 670/690Q
A
Button Sewing, 650
A
50 – Sewing
SEWING ON BUTTONS
Sew buttons, snaps, hooks and eyes quickly with your sewing
machine.
Select the fabric you are using and the stitch for sewing on
buttons 1:29 (650) / 1:33 (670/690Q).
1. Snap off the presser foot and lower the feed teeth.
2. Place the fabric, multipurpose tool (optional accessory
650/670, part number 4131056-01) and button under the
ankle with the holes in the button lined up with the swing
of the needle. Check the swing of the needle by pressing
the mirror side to side button to be sure the needle will
not hit the button. Bring the needle down into the holes
of the button with the hand wheel to verify.
Tip: When using the multipurpose tool, the button is stitched to the
fabric leaving a shank. If stitching without the multipurpose tool the
button is stitched to the fabric without distance.
Note: The recommended width of 3.0 is set for most buttons. If you sew
a tiny button or a very large coat button, decrease (–) or increase (+) the
stitch width until the swing of the needle sews in the holes of the button.
3. The default number of stitches to sew on the button is set
to 8 stitches (A). By pressing the up and down Navigator
Arrows (650) or by touching + or – (670/690Q), the
number of stitches is changed. Six to eight stitches is
standard.
4. Press the foot control. The sewing machine will sew the
number of stitches set on the display and then tie off and
stop.
5. Raise feed teeth when button sewing is completed.
Tip: Place the thin end of the multipurpose tool (optional accessory
650/670, part number 4131056-01) under the button when sewing on
light fabrics. Use the thick end for heavier fabrics. Hold in place on the
fabric with transparent tape.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Opal 690Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Opal 690Q in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Opal 690Q

Husqvarna Opal 690Q User Manual - German - 35 pages

Husqvarna Opal 690Q User Manual - Dutch - 35 pages

Husqvarna Opal 690Q User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info