609737
51
Zoom out
Zoom in
Previous page
1/68
Next page
Sewing – 49
Manual Buttonholes
A buttonhole can also be sewn step by step without the Sensor
One-Step Buttonhole Foot connected. Use Reverse to set the
length of the buttonhole.
1. Snap on Presser Foot C.
2. Place the fabric and stabilizer under the presser foot. Use
the markings on the left toe of the buttonhole foot to
position the garment edge. Place the edge of the garment
at the middle mark to have 5/8’’ (15 mm) from the edge to
the buttonhole. Lower the presser foot.
3. Begin sewing the buttonhole. The sewing machine will
sew the left column in reverse. A reverse icon (A) is shown
on the GraphicDisplay/TouchScreen indicating that you
need to press Reverse to step to the next part of the stitch.
When the buttonhole has reached the desired length, press
Reverse. Your sewing machine will bartack the end and
stitch the right side.
4. Sew to the starting mark and press Reverse to sew the
second bartack. Keep the foot control depressed until the
buttonhole is nished. The machine will stop automatically
when the buttonhole is complete.
5. Repeat the buttonhole by touching the STOP button.
Corded Buttonhole (Stretch fabrics)
When sewing buttonholes in stretch fabrics we recommend
cording the buttonhole to increase the stability and to keep the
buttonhole from stretching out.
1. Loop a piece of heavy thread or gimp cord over the nger
on the back of Presser Foot C.
2. Stitch a buttonhole. Let the satin buttonhole columns
stitch over the cord.
3. Stop sewing before the last bartack of the buttonhole is
sewn. Lift the cord off the nger and pull out the slack.
4. Cross the cord in front of the needle and stitch the bartack
of the buttonhole over the cord.
Manual buttonhole, 650
Manual buttonhole, 670/690Q
A
A
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Opal 690Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Opal 690Q in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Opal 690Q

Husqvarna Opal 690Q User Manual - German - 35 pages

Husqvarna Opal 690Q User Manual - Dutch - 35 pages

Husqvarna Opal 690Q User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info