610254

Husqvarna Huskylock 90 Manual

28
Zoom out
Zoom in
Previous page
1/36
Next page
Huskylock 9028
Changing the needle / Cambio de aguja
Turn the power switch to "OFF" before
changing the needle. Do not use any
needle which is bent or blunt.
1) Turn the handwheel toward you until
the needles are fully raised.
2) Open the front cover and lower the
presser foot.
3) Use the hexagon wrench key (found
in the accessory box), to loosen the
needle clamp screws and remove the
needles. Upper left screw for left
needle and lower right screw for right
needle.
4) Insert the new needle with the flat side
to the back into the needle clamp,
making sure it is inserted as far up as
possible. Tighten the needle clamp
screw firmly.
When the needles are set correctly, the
left needle is slightly higher than the right
one.
Use needle system HAx1 (=130/705H) no
11-16 (=75-100), (household type)
Desconecte la máquina de la red cuando
quiera cambiar la aguja. No utilizar agujas
dobladas o dañadas.
1) Ponga la aguja en su posición más alta
girando el volante hacia Ud.
2) Abre la tapa frontal y baje el
prensatelas.
3) Afloje el tornillo de fijación de la aguja
con la llave de encastre y saque las
agujas.
4) Introducir la aguja de abajo con la
parte plana hacia atrás empujándola
hasta su tope. Apriete el tornillo con la
llave de encastre.
Cuando las agujas estén puestas
correctamente, la aguja izquierda está un
poco más arriba que la guja derecha.
Utilice sistema HAx1 (=130/705H) n° 11-
16 (=75-100). Esa son las mismas que para
máquinas normales de coser.
Hexagon wrench key
Llave de encastre
Aguja
Needle
Parte plana hacia atrás
Flat side to the back
Machine front
Parte delantera de
la máquina
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 90 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info