518052
48
Zoom out
Zoom in
Previous page
1/64
Next page
~ 46 ~
7
5
3
8
6
4
2
1
Reverse button
HELPFUL INFORMATION
WHEN EMBROIDERING
If Stitches are Missing
If the embroidery machine detects that the thread has broken,
it may continue to embroider up to about eight stitches without
any thread (blank stitches) before it automatically stops.
In such cases, use the following procedure to step back through
the design to the point for continuing.
1. Press the Reverse button to step backwards in the
embroidery data. The hoop will move back one stitch
at a time. Step backwards until the blank area has been
completely passed over.
2. Continue embroidering by pressing Start/Stop.
When Bobbin Runs Out of Thread while Embroidering
1. Follow the bobbin winding instructions on page 14.
2. Remove the hoop from the machine, replace the empty
bobbin and then re-attach the hoop.
3. If your design moved forward a stitch or two when picking
up the bobbin thread, use the Reverse button to move back
to where the embroidery stopped.
Error message on machine display and computer screen says
thread is broken, machine lights are Á ashing and making a
beeping sound, but thread is not broken
Upper thread is not in the thread tension. Rethread upper
thread, (see page 11) Placing the small net that is supplied with
the accessories over the spool of thread may ensure that the
thread is unwinding properly.
After resizing a design, the density of the stitching is either
too tight or not tight enough
The software will recalculate the stitch of an imported design
when re-sizing, but only when using the DESIGN>CHANGE
SIZE option. It does have a limitation of re-sizing up to 149%
and down sizing to 51% and while still being able to re-calculate
the stitches correctly.
Will the Density of a Design be Adjusted when Resizing It?
When sizing designs in the software you can resize designs
from the Library in the hoop on screen and keep the design
density. All other formats should be changed in the DESIGN/
CHANGE SIZE menu in order to change the stitch count.
Embroidered
section
Blank stitches resulting from thread breakage
Embroidering
direction
Automatic stop
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info