518052
47
Zoom out
Zoom in
Previous page
1/64
Next page
~ 45 ~
1
2
3
4
5
6. Embroidery
THREAD TENSION CONTROL
Thread tension is automatically set at “E” for embroidery,
when the embroidery unit is attached.
You may wish to re-adjust thread tension according to the
type of fabric and thread being used.
FUNCTION BUTTONS WHEN
EMBROIDERING
1. Thread Cutter
Press Thread Cutter to automatically cut the top and bobbin
threads whenever the machine is stopped.
If Thread Cutting Mode is active (see page 20), the machine
will automatically cut the top and bobbin thread every time the
machine stops at the end of a color block.
2. Needle Stop Up/Down (Step Forward)
After the embroidery design has been transferred to the machine,
the embroidery can be advanced one stitch at a time by pressing
the Needle Stop Up/Down button.
To step forward continuously, press and hold the Needle Stop Up/
Down button.
Note: The embroidery hoop will move as it is advancing through the design.
3. Reverse (Step Backwards)
To back up through a design that is already in progress, press the
Reverse button. Pressing the button once will reverse one stitch at
a time. To reverse continuously, press and hold this button. Design
may be reversed all the way back to the À rst stitch of the design.
4. Start/Stop Button
When the Start/Stop button is pressed, the machine starts
embroidering slowly. To stop the machine, press the button again
and the machine will stop sewing and the needle stops at its highest
position.
5. LED Indicator
LED Indicator
Green light indicates machine is ready to start.
Red light indicates machine is operating.
Flashing red light indicates a problem or an error.
Flashing for 2 - 3 seconds shows that an incorrect operation
was made.
• Continuous Á ashing indicates that machine malfunctions.
Decrease tension
Increase tension
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info