518052
50
Zoom out
Zoom in
Previous page
1/64
Next page
~ 48 ~
MULTIPLE HOOP EMBROIDERY
Multiple Hoop embroidery is a special feature in the
software that will allow embroidery data
which is larger than a single embroidery hoop to be sent to
the machine to stitch out, while making it easy to re-hoop
the fabric so that each part of the design lines up exactly.
This embroidery data may be a single design that is too
large for the hoop or a combination of smaller embroidery
elements and/or lettering, that when combined together
make a much larger À nished design.
The Multiple Hoop feature splits the design elements in
up to four different parts, and then sews them precisely,
matching one section to the other. When re-hooping the
fabric, the Multiple Hoop feature will compensate for
misalignment if the fabric has been placed slightly askew in
the hoop.
When stitching an embroidery design that is too large for
the hoop, it can be difÀ cult to re-hoop the fabric with exact
alignment. Multiple Hoop utilizes a system where three
alignment points (A, B, and C) are input on cross lines
that have been marked onto the fabric. When these points
are input, they inform the machine exactly as to how the
fabric is positioned into the hoop and will therefore sew
the design to the alignment of the cross lines. If the fabric
is slightly askew, this system will compensate for it and sew
accordingly.
Note: The Multiple Hoop feature will only compensate for a slight
misalignment in the vertical cross line. Please try to hoop the fabric as
accurately as possible.
PREPARING THE FABRIC
Note: The fabric must be large enough to accommodate the amount of
hoops that will be required to stitch out the design.
1. Using a very À ne-lined water soluble marker, mark a line
vertically down the center of the fabric.
Note: A thin line is very important to the accuracy of the À nal
outcome of the embroidery.
2. Mark a line horizontally across the center of the fabric.
The vertical and horizontal lines must be at precise right
angles to each other. These lines will now be referred to
as the”cross lines”. These cross lines will be used to set
the fabric into the hoop according to the divided design
layout.
Cross lineFabric
Cross line
Intersection of cross
lines must be at perfect
90 degree angles.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info