518052
26
Zoom out
Zoom in
Previous page
1/64
Next page
~ 24 ~
ZIGZAG
Presser foot: Utility Foot A
The top thread may appear on the bottom depending on
the thread, fabric, type of stitch and sewing speed, but the
bobbin thread must never appear on top of the fabric.
Adjust thread tension as necessary.
Under side
Top side
Satin Stitch
This is a closely spaced stitch used for appliqué, bar-tacking,
etc. Slightly loosen the top thread tension for satin stitching.
Set the stitch length between 0.5 and 2.0, depending on the
weight of thread being used. Use a backing of stabilizer or
interfacing to avoid puckering.
Set length between 0.5 and 2.0.
Placement of Patterns
Stitch width of pattern increases from selected needle
position as illustrated.
Center positionLeft position
Right position
THREE-STEP ZIGZAG
Presser foot: Utility Foot A
This is a strong stitch since, it makes three short stitches
where the normal zig-zag makes only one.
For this reason it is highly recommended for overcasting all
types of fabrics.
It is also ideal for mending tears, applying patches and
inserting elastic.
BRIDGING
Presser foot: Decorative Stitch Foot B
This is a popular decorative stitch (used in sleeves or fronts
of blouses and dresses). To attach two separate pieces of
fabric together, leave a little space in between.
To prepare the fabric:
Fold under the seam allowances on the cut edges, and press.
Baste folded edges to light weight tear-away stabilizer with
about 1/8" (0.3 cm) space between. Stitch over the 1/8" (3
mm) allowance, just catching the fabric fold on both sides
with needle. Remove bastings and stabilizer; press.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info