518052
27
Zoom out
Zoom in
Previous page
1/64
Next page
~ 25 ~
21
21
3
4
4. Sewing
BLIND HEM
Presser foot: Blind Hem Foot D
Stitch 08: Regular blind hem for normal fabrics
Stitch 10: Elastic blind hem for soft, stretch fabrics
1. First À nish the raw edge. Do this by turning it under on
À ne fabrics or overcasting it on medium to heavyweight
fabrics.
Then fold the hem up the required depth, press and pin
in place.
2. Now fold the fabric as illustrated.
3. Place the fabric under the foot. Make sure the folded
edge of the fabric follows the inside of the right “toe”
of Blind Hem Foot D. The left swing of the needle
should just catch the edge of the folded fabric. If
necessary, adjust the stitch width as needed to barely
“catch” the fold.
Sew slowly, guiding the fabric carefully along the edge of
the guide.
4. When completed, the stitching is almost invisible on the
right side of the fabric.
Note: It takes practice to sew blind hems. Always make a sewing test
À rst.
SHELL EDGE
Presser foot: Utility Foot A
Turn under the raw edge and press. Place the fabric right
side up so that the zigzag part of the stitch sews just over
the folded edge, pulling the fabric in to form a shell hem.
Trim away excess fabric close to the stitching line.
Medium to heavy weight fabric
Under side Under side
Under side Under side
Light weight fabric
Top side
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info