518052
24
Zoom out
Zoom in
Previous page
1/64
Next page
~ 22 ~
4
UTILITY SEWING
STRAIGHT STITCH
The straight stitch is the stitch most frequently used. See
below how to set the machine for basic straight stitch.
Select: Straight stitch (stitch no. 00).
Presser foot: Utility Foot A
Thread your machine with top and bobbin thread. Pull
both threads under the presser foot toward the left,
leaving a 6” (15 cm) thread end.
Place the fabric under the presser foot and lower the
presser foot. Turn the hand wheel toward you until the
needle enters the fabric. Start the machine by pressing
the foot control. Guide the fabric gently with your hands.
When reaching the edge of the fabric, stop sewing.
Turn the handwheel until the needle is in its highest
position, then raise the presser foot. Pull the fabric to
the rear and cut off excess thread with the thread cutter
located on the bottom of the sewing head, as shown.
Reverse
It is a good idea to begin and end seams with reverse
stitches to reinforce the seams in order to prevent
unraveling.
Press Reverse button. The machine will sew three stitches
in reverse and then stop. Press the foot control to sew
forwards.
Keeping Seams Straight
To keep the seam straight, use one of the numbered guide
lines on the stitch plate. The numbers indicate distance from
the needle at its center position.
The guide line on the bobbin cover plate is 1/4" (6mm)
seam guide line, used for piecing quilt blocks or for sewing
narrow seams.
Sewing
3/4" (19
mm
)
5/8" (16
mm
)
1/2" (13
mm
)
3/8" (9
mm
)
1/4" (6
mm
)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info