518052
22
Zoom out
Zoom in
Previous page
1/64
Next page
~ 20 ~
6
7
8
Decrease tension Increase tension
6. TWIN NEEDLE SAFETY
When using twin needles, press the twin needle safety
button regardless of the stitch you selected. Doing so
will reduce the stitch width automatically and save broken
needles and possible damage to your machine.
When the button is pressed, the LED indicator next to the
button is lit, indicating that Twin Needle Safety is activated.
When turning the Stitch Selection Dial, the machine now
automatically skips all stitches that are not suitable for twin
needle, and a beep will sound when selecting buttonhole
pattern with the direct selection button, indicating that
buttonholes cannot be sewn with twin needle.
Well balanced
Top tension
too tight
Top tension
too loose
Note: Always select the Twin Needle Safety prior to selecting a pattern. This will preclude any possibility of the twin needle breaking.
To disengage Twin Needle Safety and return the machine to normal sewing mode, either press the Twin Needle Safety button again or
turn the machine off. Twin Needle Safety is only active when the LED light next to the Twin Needle button is lit.
7. THREAD CUTTING MODE
Press this button to activate Thread Cutting Mode. The
machine will automatically cut the top and bobbin thread
every time you stop sewing. When activated, the LED
indicator next to the button is lit.
Note: Twin needle safety and Thread cutting mode cannot be enabled
at the same time.
8. THREAD TENSION CONTROL BUTTON
Press - to decrease and + to increase thread tension. While
pressing the button, thread tension adjustment mode is
displayed on LCD screen.
ADJUST TOP THREAD TENSION
The correct appearance of your stitching is mainly
determined by the balanced tension of both top and bobbin
threads. The tension is well balanced when these two
threads ‘lock’ in the middle of layers of the fabric you are
using.
The thread tension is set automatically when a stitch is
selected. If, when you start to sew, you realize that the
stitching is irregular, the thread tension needs to be adjusted.
Make any adjustments of the thread tension with the presser
foot lowered.
Bobbin Tension
The bobbin tension has been correctly set at the factory, so
you do not need to adjust it.
Under side
Top side
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info