Manual Husqvarna Designer SE - Limited Edition (page 14 of 100) (English)

609910

Zoom out

Zoom in

1/100

1-14

Set it Up

5. Push the bobbin winder lever towards the bobbin

to wind. A pop-up appears on screen. To adjust

winding speed drag the arrow on the slider with

your stylus. Stop and start the bobbin winding

with the on-screen buttons.

When the bobbin is full, the bobbin winder

lever will switch back and the winding will stop

automatically. The pop-up closes. Remove the

bobbin and cut the thread using the bobbin thread

cutter (c).

Winding Specialty Threads

We do not recommend winding speciality threads such

as “invisible” or other stretchy threads, metallic or Á at

metallic threads through the needle.

Always wind these threads at minimum speed.

1. Place an empty bobbin on the bobbin spindle at

the front of the machine (the markafacing up).

Use only the original Husqvarna Viking green

bobbins.

2. Place the large spool holder and a felt pad under

the spool on the main spool pin set in the vertical

position.

3. Bring the thread over the pre-tension thread guide

and down around the thread tension disc (a), then

through thread guide (b) as illustrated.

4. From above, wind a few turns of thread clockwise

around the bobbin and into the thread cutter (c).

5. See top of page (Bobbin Winding, step 5).

Bobbin Winding while

Embroidering or Sewing

Your Designer SE Limited Edition has a separate

motor for bobbin winding to wind bobbins while

embroidering or sewing.

Place the spool on the auxiliary spool pin and thread

the machine for bobbin winding same as above except

the thread does not go over the pre-tension thread

guide.

NOTE: The main spool pin must be in horizontal position

to wind from the auxiliary spool pin.

NOTE: Regular threads can also be wound this way or with

the spool pin in horizontal position.

NOTE: Do not lower the winding speed too much when

winding through the needle. The resistance will be too high

and Designer SE Limited Edition cannot wind.

NOTE: Depending on the type of thread, wrap the thread one

or two turns around the bobbin thread tension disc (a) to

put more tension on the thread. Embroidery weight bobbin

thread should be taken two turns around the thread tension

guide.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE - Limited Edition in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE - Limited Edition

Husqvarna Designer SE - Limited Edition User Manual - German - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - Dutch - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Designer SE - Limited Edition Manual

Product: